Partner programme · 02 — Gas stations
Stage III vapor recovery for gas stations
Who we are looking for
Fuel retailers, station packagers and installers who already fit dispensers, pipework and tank vents.
What the unit does
Compression, condensation and membrane separation at the tank vent.
The unit collects the vapour that leaves a station tank through the vent, condenses it, and returns the liquid to the tank instead of releasing it to atmosphere.
Stage III is the last stage of the vapour chain at a station: Stage I covers deliveries into the tank, Stage II covers the dispenser, and Stage III treats what remains in the tank and is released through the vent. The unit is therefore installed at the tank vent, on a concrete platform, and only where Stage II is already in place.
The stream passes a compressor, an air-cooled condenser and a gas-liquid separator. Separated liquid returns to the tank; the remaining gas goes to a membrane module, where hydrocarbon is recovered under vacuum and returned to the tank. Recovery is above 99% and outlet NMHC is held at about 10 g/m³.
Operation is automatic. The unit starts when tank pressure reaches the upper set point and returns to standby below the stop value, so no operator is needed between visits. No process water is required, and the enclosure is rated IP55, Ex d e ib mb IIB T4 Gb, for –40 to +70 °C.
Where it is used
Vapour from the tank vent, where Stage II recovery is already installed.
Own tank, own vent line, refuelling on a fixed schedule.
Standard unit on a 1600 × 1100 mm concrete platform.
Loading and storage on the same site, one or two tanks.
Existing forecourt, unit added at the vent without touching the dispensers.
Same unit repeated across a station batch, one bill of materials.
Partner policy
Terms for agents and distributors in any region.
To Our Partners Worldwide
We are a professional manufacturer specializing in Vapor Recovery Units (VRU). Our products serve gasoline stations, large oil depots, fine chemical and pharmaceutical industries. Adopting proven condensation and membrane separation technology, our equipment features stable operation and high recovery efficiency, with complete explosion-proof certificates and more than 100 patents. Standard units are kept in stock for fast delivery, and custom solutions are available for special projects.
We are recruiting regional agents and reliable partners worldwide.
We can start our cooperation with small trial orders to streamline all procedures. Once the cooperation matures and the agreed sales target is fulfilled, an exclusive distribution agreement can be signed for your territory.
As direct factory supply, we offer competitive pricing without middleman markup. We provide full technical support, including site evaluation, solution design, drawings, brochures and technical training. Our engineers can attend site installation & commissioning for the first project, and we offer remote after-sales support for long-term operation.
We welcome partners with existing channels in oil, petrochemical and environmental engineering sectors to develop your market together. Contact us for agency terms, quotation and further discussion.
We will serve as your reliable factory backup. You only need to leverage your industry expertise and local resources to develop business. We welcome partners from all regions to contact us.
Our recommendations
First, you need to have certain knowledge of the petrochemical industry, understand its characteristics and the functions of relevant equipment.
Besides understanding industry features and equipment functions, you also need to be familiar with local environmental regulations and certification requirements for equipment import. Familiarity with your country’s environmental and equipment certification rules will make your work much more efficient.
You need a team of at least five members, covering business development, public relations and on-site condition survey. With such a team, you can quickly sort out project requirements and stakeholder relations. Once we receive your information, we can promptly work out the implementation plan and tackle all matters precisely.
Our production capacity is well-established. Our Stage III vapor recovery units for gas stations are standardized and mass-produced, with an annual output of up to 1000 sets. For large oil depot projects, we have more than ten mechanical engineers on staff, supported by retired professors from Dalian University of Technology as our core technical advisors.
Contact
Agency terms, quotation and technical documents by email.
Agency enquiry
Fields marked * are required